How to Choose the Right Hydro Evacuation Nozzle
Hydro evacuation nozzles are available in different types to cater to different applications and project conditions. The right evacuation nozzle can be difficult to find. Therefore, you should find out which nozzle suits your needs before you embark on renting a hydro excavation nozzle. Before choosing which hydro evacuation nozzle to rent, there are several things you need to consider. The first thing you should do before you embark on renting a hydro evacuation nozzle is to conduct proper research. When researching, you should focus on finding the best place for hydro evacuation nozzle rentals in your area and identifying your needs.
A hydro evacuation nozzle that matches the capabilities of your pump should be the first factor to consider. However, you need to understand how hydro evacuation nozzles are sized to do this. Nozzle size and pressure has a lot of influence on the flow rate of water. Overloading the hydro evacuation nozzle can be disastrous. Overloading a hydro evacuation nozzle is avoided by checking the manufacturer’s ratings of the pump and the flow rate chart. Secondly, you should consider the project you are working on when choosing a hydro evacuation nozzle. The best hydro evacuation nozzle for potholing applications is the rotating turbo nozzle. The rotating turbo nozzle is the best nozzle for potholing applications because it has a high impact zero degrees stream that rotates at an optimized speed to form a corn-shaped shaped pattern.
The best hydro evacuation nozzle for trenching applications is the static zero degrees nozzle. A static zero-degree nozzle cuts through dirt with less water. Static zero degree nozzle form a blade-like flow by combining two or more static streams in a linear pattern. The most suitable nozzle for trenching applications is a static zero-degree nozzle because it has a linear flow. You should find a small-sized hydro evacuation nozzle if you are concerned with the safety of underground utilities. The less flow of a small-sized hydro evacuation nozzle cannot damage underground utilities. Also, when using underground evacuation nozzles in places with underground utilities, you should lower the flow pressure.
Twenty-five hundred psi is the recommended maximum pressure when using a rotating nozzle in places with underground utilities. Lowering the pressure to twenty-five hundred allows you to wash the underground utility and avoid damages the utilities. Considering the digging speed and the water consumed during the digging is important when choosing an underground evacuation nozzle. If you are far away from a water source or dumping site for the debris, you should choose a small-sized nozzle. You will save water when you select a small-sized nozzle, but it will take time to dig the required size.